LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Air Temperature, Intake >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Air Temperature, Intake: Installation

GC0148204Courtesy of CHRYSLER GROUP, LLC
  1. Inspect and lubricate the IAT/MAP sensor O-ring seal.
  2. Clean the IAT/MAP sensor sealing area.
  3. Install the IAT/MAP sensor (1) and securely tighten the bolt (2).
  4. Connect the IAT/MAP sensor wire harness connector (3).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals