LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Accelerator Pedal Position: Installation

GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Install the accelerator pedal assembly (3) and securely tighten the fasteners (2).
  2. Connect the accelerator pedal position sensor wiring connector (1).
  3. Install the drivers lower dash board close out panel.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals