Bank 1

Courtesy of CHRYSLER GROUP, LLC

Check condition of Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring seal.
Clean the sensor sealing area on the supercharger.
Lubricate the TMAP sensor O-ring seal with clean engine oil.
Install the TMAP sensor (3) into the supercharger. Tighten the screw (1) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
Connect the TMAP sensor wire harness connector (2).

Courtesy of CHRYSLER GROUP, LLC
Install the left side engine cover (1).
Connect the negative battery cable.