LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery, Diesel >> Sensor, Fuel Pressure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Fuel Pressure: Removal

WARNING:

Observe the following precautions when working on fuel systems: No sparks, open flames or smoking. Avoid inhaling and swallowing fuel. Avoid eye and skin contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing. Failure to observe these precautions may result in fire, explosion, property damage, and serious or fatal injury.

WARNING:

High-pressure lines deliver diesel fuel under extreme pressure from the injection pump to the fuel injectors. This may be as high as 2000 bar (29, 008 psi). Use extreme caution when inspecting for high-pressure fuel leaks. Fuel under this amount of pressure can penetrate skin causing personal injury or death. Inspect for high-pressure fuel leaks with a sheet of cardboard. Wear safety goggles and adequate protective clothing when servicing fuel system.

  1. Disconnect and isolate negative battery cable.
  2. Remove the right fuel rail. Refer to RAIL, FUEL, REMOVAL RAIL, FUEL, REMOVAL .
    GC0173503Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around the fuel pressure sensor.
  4. Remove the fuel pressure sensor (1).
  5. Install a protective cap over opening.