LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Plug, Glow >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

  1. Using the tool, install the glow plug and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the glow plug wire harness connectors
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals