Diagnostic Test

Replace the Occupant Classification Module (OCM) 

1. Make sure the battery is fully charged.
2. Turn the ignition off, wait ten seconds and turn ignition on.
3. With the scan tool, read the OCM DTC.

   Did the scan tool display active or stored B2212-00-OCCUPANT CLASSIFICATION MODULE INTERNAL DTC?

   Yes 

   • Replace the Occupant Classification Module (OCM) in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
   • Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST  .

   No 

   • Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST  .