| 4WD,Standard Trans | DOES NOT include wheel alignment.
Includes: Bleed Clutch System. | 10.3 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| Standard Trans | | 0.4 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| Standard Trans, Concentric Slave Cylinder (CSC) | | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Replace: |
| Standard Trans, Rear,w/Clutch Assembly Removed | | 0.8 | | B |
| Combination Procedure: DIFFERENTIAL OUTPUT SEAL: Replace: |
| Standard Trans, Axle Shaft Oil Seal,Each | | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Standard Trans, w/Clutch Assembly Removed | | 0.5 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Replace: |
| Standard Trans | | 0.5 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Standard Trans | | 0.5 | | C |