Removal And Installation: LHD: Removal
- Disconnect and isolate the negative battery cable(s). Refer to BATTERY DISCONNECT AND CONNECTION .
- Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
- Disconnect the two Electric Hydraulic Power Steering (EHPS) pump wire harness connectors (2) and remove the wiring harness routing clips from the EHPS pump.
- With the hose clamp released disconnect the supply line (1) from the EHPS pump and secure the hose end higher than the power steering pump reservoir.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the right front wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION
.
- Remove the EHPS pump pressure line bolt (3) and remove the EHPS pressure line (4) from the EHPS pump.
- Loosen the two power steering pump bracket frame bolts (2).
- With the hose clamp released disconnect the return line (3) from the EHPS pump.
- Remove the EHPS pump (2) from the vehicle.