LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2020 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Technical Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

DESCRIPTION N.m Ft. Lbs. In. Lbs. NEW FASTENER (3)
Camshaft Position Sensor Bolt (CMP) - 3.6L 9 - 80  
Camshaft Position Sensor - 5.7L 12 9 -  
Camshaft Position Sensor - 6.2L 12 9 -  
Camshaft Position Sensor - 6.4L 12 9 -  
Ignition Capacitor Nut 10 - 89  
Ignition Capacitor Stud to Cylinder Head 28 21 -  
Ignition Coil Mounting - 3.6L 7 - 62  
Ignition Coil Mounting - 5.7L 7 - 62  
Ignition Coil Mounting - 6.2L 7 - 62  
Ignition Coil Mounting - 6.4L 7 - 62  
Knock Sensor - 3.6L (1) 22 16 -  
Knock Sensor - 5.7L (1) 20 15 -  
Knock Sensor - 6.2L (1) 20 15 -  
Knock Sensor - 6.4L (1) 20 15 -  
Spark Plugs - 3.6L 20 15 -  
Spark Plugs - 5.7L 25 18 -  
Spark Plugs - 6.2L 25 18 -  
Spark Plugs - 6.4L (2) 15 11 -  
Variable Valve Timing Solenoids - 3.6L 4 - 35  
Negative Battery Cable Nut 5 - 45  
(1) Do not apply any sealant, thread-locker or adhesive to bolts. Poor sensor performance may result.
(2) Torque critical tapered design. Do not exceed 21 N.m (15 ft. lbs.).
(3) NEW FASTENER:  Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specification.
scientia non olet · About LEMON Manuals