LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> 2.0L Ignition System (Service Information) >> Solenoid, Variable Valve Timing >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid, Variable Valve Timing: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the top engine cover. Refer to COVER, ENGINE, REMOVAL .
  3. Remove the air cleaner body cover and clean air hose. Refer to REMOVAL .
    GC0181153Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the Variable Valve Timing (VVT) solenoid wire harness connector (1).
    GC0181764Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolts (2) and the VVT solenoid (1).
    GC0186994Courtesy of CHRYSLER GROUP, LLC
  6. If required, remove the right isolator to engine mount bracket bolt (2) to gain access to the lower VVT solenoid bolt (1).
    GC0181478Courtesy of CHRYSLER GROUP, LLC
  7. Remove the gasket (1).
scientia non olet · About LEMON Manuals