Wheel Hub: Remove & Replace
WARNING: This page is about the Compass 80th Anniversary Edition, 4WD, which is a different variant/trim than selected.
Includes: Repack and adjust Bearings (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD, Rear,Hub and Bearing Assembly,Both | 1.8 | B | ||
| 4WD, Rear,Hub and Bearing Assembly,One Side | 1.0 | B | ||
| Front,Hub and Bearing Assembly,Both Sides | 1.8 | B | ||
| Front,Hub and Bearing Assembly,One Side | 1.0 | B | ||
| Combination Procedure: DISC ROTOR: Correct: | ||||
| Lateral Runout,Each | Correct Rotor lateral runout by indexing or correction plate. | 0.2 | B | |
| Combination Procedure: HUB & ROTOR DISC: Clean & Inspect: | ||||
| Corrosion,Each | Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor. | 0.2 | B | |