Programming The BCM
NOTE:
During the Body Control Module (BCM) replacement procedure the original VIN and electronic code (key code) will be needed.
NOTE:
In some cases the vehicle may exhibit a start and stall condition after the BCM is replaced. If this occurs the key learn procedure may need to be run and all keys relearned. Make sure that all keys are present if key relearn is required; keys not present will be locked out.
NOTE:
Customer keys that are not present at the dealer after the BCM was replaced may not have RKE functionality until the customer turns the key in the ignition.
When replacing any module refer to the replacement and programming order. For more information see the MODULE REPLACEMENT AND PROGRAMMING ORDER GUIDE in STANDARD PROCEDURE .
- Make certain that the ignition is in and remains in the RUN position while performing this procedure.
- Select the BCM module from the "Vehicle View" screen.
- Select the Misc. Functions tab with the "BCM View" menu options.
- Select the BCM Replaced routine and click the start button.
- Follow the prompts on the screen to complete the procedure.