LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Trailhawk >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Service Information) >> Generator >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

NOTE:

LHD shown, RHD similar.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine beauty cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION COVER, ENGINE, REMOVAL AND INSTALLATION .
  3. Remove the right front wheel. Refer to REMOVAL AND INSTALLATION .
  4. Remove the accessory drive serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
    GC0179238Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the upstream oxygen sensor electrical connection (1).
    GC0179074Courtesy of CHRYSLER GROUP, LLC
  6. Disengage and oxygen sensor wiring and remove the bracket (1).
  7. Remove the exhaust manifold upper heat shield bolts (2) and then remove the shield.
    GC0172681Courtesy of CHRYSLER GROUP, LLC
  8. Remove the nut to disconnect the wiring (1) to the generator.
    GC0179248Courtesy of CHRYSLER GROUP, LLC
  9. Remove the upper and lower generator mounting bolts (1).
  10. Remove the generator from the engine compartment.
scientia non olet · About LEMON Manuals