LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Trailhawk >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Shaft, Intermediate >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

GC0199629Courtesy of CHRYSLER GROUP, LLC
  1. Secure the steering wheel with the tires in the straight ahead position.
    NOTE:

    Some vehicles may not be equipped with an internal locking shaft that allows the ignition key cylinder to be locked with the key. Alternative methods of locking the steering wheel for service will have to be used.

  2. Remove and DISCARD  the intermediate shaft coupler pinch bolt (3) from the steering gear end of the shaft.
  3. Slide the intermediate shaft coupler off of the steering gear.
  4. Remove and DISCARD  the intermediate shaft coupler pinch bolt (1) from the steering column end of the shaft.
  5. Slide the intermediate shaft coupler off of the steering column.
  6. Remove the intermediate shaft (2).
scientia non olet · About LEMON Manuals