Removal & Installation
WARNING: This page is about the Gladiator 80th Anniversary Edition, 3.0L Eng VIN M, Full Time T/Case Control, which is a different variant/trim than selected.
8 SPEED TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0L Eng,Automatic Trans | Includes: Check and adjust Transmission Fluid level with fluid temperature within parameters. | 6.8 | C | |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 3.0L Eng, Rear,Seal | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: OUTPUT SHAFT SEAL: Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| 0.6 | B | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| Includes: R&I Valve Body Assembly. | 2.7 | B | ||