Sensor, TMAP-Intake Manifold: Installation: Intermediate

Courtesy of CHRYSLER GROUP, LLC

1. Check the condition of Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring.
2. Clean the sealing area on the supercharger.
3. Lubricate the TMAP sensor O-ring seal with clean engine oil.
4. Install the TMAP sensor into the supercharger. Tighten the screw (1) to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
5. Connect the TMAP sensor wire harness connector (2).
6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.