Throttle Body: Removal: 3.6L

CAUTION:

Never have the ignition key in the ON position when checking the throttle body shaft for a binding condition. This may set DTC's.

Disconnect and isolate the negative battery cable.
Remove the air cleaner body. Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Disconnect the throttle body wire harness connector (1) and disengage the wire harness clip (2) from the throttle body.

Courtesy of CHRYSLER GROUP, LLC
Remove the four bolts (1) and the throttle body.

Courtesy of CHRYSLER GROUP, LLC
Remove and discard the O-ring seal (1).