Coil, Ignition: Removal: 5.7L/6.4L

Disconnect and isolate the negative battery cable.
Remove the engine cover.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the wire harness connector (1) from the coil (3).
Clean the area at the base of the coil with compressed air before removal.
NOTE:
The ignition coil mounting bolts are retained in the ignition coil.
Remove the ignition coil mounting bolts (2).

Courtesy of CHRYSLER GROUP, LLC
Carefully pull up the ignition coil (1) to removed it from the cylinder head cover.