LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Renegade Islander, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Power Inverter >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
    GC0165513Courtesy of CHRYSLER GROUP, LLC
  3. Working within the storage compartment, remove the fasteners (1a) and remove the power inverter module and bracket (1b).
  4. Disconnect the wire harness connector (2) from the power inverter module.
  5. Separate the power inverter module (3a) from the bracket (3b).
scientia non olet · About LEMON Manuals