LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Renegade Trailhawk >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Outlet, Power >> Removal And Installation >> Mid Power Outlet >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mid Power Outlet: Installation

  1. Position the mid power outlet and install the retaining clips.
  2. Connect the wire harness connector to the mid power outlet.
  3. Install the floor console rear cover. Make sure the retainer clips are fully engaged to the floor console.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals