LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Evaporative Emissions >> Sensor, Fuel Tank Pressure >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Fuel Tank Pressure: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise and support the vehicle

    Refer to HOISTING, STANDARD PROCEDURE .

  3. Remove the right rear wheel house splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .
    GC0186424Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the fuel tank pressure sensor harness connector (1).
  5. Disengage the fuel tank pressure sensor recirculation line retainer (3).
  6. Disconnect the quick connect fittings (2) and remove the fuel tank pressure sensor.
scientia non olet · About LEMON Manuals