LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, Manifold Absolute Pressure (Map) >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

  1. Remove the right front tire and wheel. Refer to REMOVAL AND INSTALLATION .
  2. Partially remove the front half of the left wheelhouse splash shield to gain access to the sensor. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
    GC0165663Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the manifold air pressure sensor connector.
    GC0165959Courtesy of CHRYSLER GROUP, LLC
  4. Rotate 90° counter clockwise and remove the sensor (1).
  5. Clean intake manifold mating surface.
scientia non olet · About LEMON Manuals