Removal And Installation: Installation
- Install the fuel pump assembly using a NEW
tank seal, taking care to align the reference (1a) on the tank with the appendix (1b) of the pump.
- Install the fuel pump assembly mounting ring, by aligning the reference (1a) with the reference (1b) on the tank.
- Mount the 2000002100 (EMEA) or (special tool #9340, SAE Fuel Pump Lock Ring Wrench) (NAFTA) tool (2) and tighten the fuel pump assembly retaining nut.
- Connect the fuel vapor quick coupling.
- Connect the quick coupling of fuel supply hose.
- Connect the wire harness connector to the fuel pump.
- Install the access cover to the fuel pump, tighten the screws and lower the cover.
- Install the rear seat cushion. Refer to SEAT CUSHION, REMOVAL AND INSTALLATION .