LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Gas >> Throttle Body >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

  1. Install a new gasket on the inlet plenum.
  2. Install the throttle body, positioning it correctly on the centering pin.
  3. Install the throttle body fasteners and tighten to the proper torque specification. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
  4. Install the throttle body reinforcement bracket and tighten the fastener to the proper torque specification. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
  5. Connect the wire harness connector to the throttle body.
  6. Install the hose for the vacuum brake booster, engage it in its clip and connect the quick coupling.
  7. Install the tubing from the air filter to the throttle body, and securely tighten the clamp.
  8. Connect the wire harness connector to the air temperature sensor.
  9. Connect the air hose from the filter to the throttle body, and securely tighten its strap.
  10. Connect the quick coupling to the engine oil vapor hose.
  11. Securely tighten the air hose to the throttle body filter fastener.
  12. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals