LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Pump, Water >> Removal And Installation >> 2.4L Multi Air >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.4L Multi Air: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
  4. Remove the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
  5. Drain the cooling system. Refer to STANDARD PROCEDURE .
  6. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
    GC0165902Courtesy of CHRYSLER GROUP, LLC
  7. Remove the bolts (1a) and the water pump pulley (1b).
    GC0163921Courtesy of CHRYSLER GROUP, LLC
  8. Remove the bolts (1a) and the water pump (1b) and the gasket.
  9. Clean the water pump mounting surface (1).