Sensor, Fuel Tank Pressure: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the right rear wheel house splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL
.
- Disconnect the fuel tank pressure sensor harness connector (1).
- Disengage the fuel tank pressure sensor recirculation line retainer (3).
- Disconnect the quick connect fittings (2) and remove the fuel tank pressure sensor.