Timing Chain: Remove & Replace
WARNING: This page is about the Compass Altitude, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 7.9 | B | |||
| Combination Procedure: BALANCE SHAFT SPROCKET: Remove & Replace: | ||||
| Includes: R&I Oil Pump Drive Chain. | 0.7 | B | ||
| Combination Procedure: CAMSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| Each | DOES NOT include Calibration. | 0.2 | B | |
| Combination Procedure: CRANKSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| Includes: R&I Oil Pump Drive Chain. | 0.6 | B | ||
| Combination Procedure: CRANKSHAFT POSITION SENSOR: Calibrate: | ||||
| Cam/Crank Variation Relearn | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: OIL PUMP DRIVE CHAIN: Remove & Replace: | ||||
| 0.5 | B | |||
| Combination Procedure: OIL PUMP DRIVE CHAIN TENSIONER: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TIMING CHAIN GUIDE: Remove & Replace: | ||||
| Each | 0.1 | B | ||