LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2023 >> Compass Red >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

GC0188366Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering column (3) in the vehicle.
  2. Install the two front steering column support bolts (2) and tighten them to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  3. Install the two rear steering column support nuts (1) and tighten them to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0179422Courtesy of CHRYSLER GROUP, LLC
  4. Install the intermediate shaft (2) to the steering gear.
  5. Install a NEW  intermediate shaft pinch bolt (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  6. Install the Steering Column Control Module (SCCM). Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL AND INSTALLATION .
  7. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  8. Install the steering wheel. Refer to WHEEL, STEERING, REMOVAL AND INSTALLATION .
  9. Connect the negative battery cable.
scientia non olet · About LEMON Manuals