Drivetrain Control Module (DTCM) - DTCS C2501-87 To U1964-83

• DTC Troubleshooting
  • C2501-87-Brake8 Or GE Or Lin BCM IGW1 Or Status ECM Or Mot TRANSM3 Message Missing - Missing Message
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2502-64-Status ECM TCFAILSTS Or TRANSM2 TRANSMISSIONFAILSTS Or Brake8 DSTFAILSTS Or Brake8 ESCFAILSTS Or Status ECM EMSFAILSTS Or GE ELECTRICSTEERINGFAILSTS - Signal Plausibility Failure
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2503-87-Instrument Panel Cluster IPC - Absent
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2504-87-Lost Communication With Abs
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2506-64-Shift Lever Position - Signal Plausibility Failure
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2507-64-Brake System Module - Signal Plausibility Failure
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0001-88-C Can - Bus Off
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U1700-87-BCM Body Control Module - Missing Message
  • U1701-87-Lost Communication With Pcm
  • U1702-87-Lost Communication With EPS
  • U1706-87-Lost Communication With Abs
  • U1710-87-Lost Communication With HVAC
  • U1711-87-Lost Communication With TCM
  • U1952-83-Implausible Data Received From Abs
  • U1956-83-Implausible Data Received From Abs
  • U1958-83-Implausible Data Received From Abs
  • U1960-83-Implausible Data Received From Pcm
  • U1962-83-Implausible Data Received From Pcm
  • U1962-87-Message Engine15-Missing Message
  • U1964-83-Implausible Data Received From Pcm