(Dual Clutch Selector Module (DCSM) - Electrical Diagnostics)

• Diagnostic Code Index
• DTC Troubleshooting
  • P0562-00-System Voltage Low
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0563-00-System Voltage High
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0606-00-Control Module Processor
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0607-00-Control Module Performance
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P060A-00-Internal Control Module Monitoring Processor Performance
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0814-00-Transmission Range Display Circuit
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P081C-00-Park Input Circuit
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0914-00-Gear Shift Position Circuit Light Fault
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0919-00-Gear Shift Position Control Error Heavy Fault
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0928-00-Gear Shift Lock Solenoid-Actuator Control Circuit A-Open
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0929-00-Gear Shift Lock Solenoid-Actuator Control Circuit A Range-Performance
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
      • Notes
      • Diagnostic Test
  • P0955-00-Auto Shift Manual Mode Circuit General Electrical Failure
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P1C73-00-Park Switch Circuit Stuck
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1C82-00-Auto Shift Manual Mode Circuit Signal Stuck
    • Notes
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0001-00-Dual Clutch Shifter Module DCSM Can Communication Bus Off
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0002-00-Dual Clutch Shifter Module DCSM Can Communication Bus Performance Node Mute
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0100-00-Lost Communication With ECM/Pcm
  • U0101-00-Lost Communication With DCTM
  • U0155-00-Lost Communication With Instrument Panel Cluster IPC Control Module
  • U0401-00-Invalid Data Received From ECM Pcm A
  • U0402-00-Invalid Data Received From DCTM
  • U0422-00-Invalid Data Received From Body Control Module
  • U0423-00-Invalid Data Received From Instrument Panel Cluster Control
  • U1400-00-Lost Communication With Body Control Module
  • U1701-00-Engine1 (From Engine Control Module) Missing Message
  • U1930-00-DCSM_OPERATIONALMODESTS SNA Plausibility
    • Notes
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U1932-00-BCM_Command OPERATIONALMODESTS (SNA) Plausibility
  • U1933-00-BCM_Command (From Body Control Module) Missing Message
  • U1934-00-BCM_Command From BCM And Body2 From BCM Missing Message
  • U193C-00-BCM_Command (From BCM) And Engine1 (From ECM) Missing Message
  • U1950-00-BCM Command (From Body Control Module) Message CRC Or Message Counter Fault
  • U1960-00-Engine1 From Engine Control Module Message CRC Or Message Counter Fault
  • U197C-00-TRANSM2 From Transmission Control Module Message CRC Or Message Counter Fault
• Standard Procedure
  • DCSM Pre-Diagnostic Troubleshooting Procedure
  • DCSM Verification Test