Drivetrain Control Module (DTCM) - DTCS C2170-98 To C2205-24

• DTC Troubleshooting
  • C2170-98-Motor 2 Power Stage - Component Or System Over Temperature
    • Notes
    • Description And Operation - All Wheel Drive (AWD) System
    • General System Architecture
    • Component Functional Description-Power Transfer Unit (PTU)
    • Component Functional Description-Rear Drive Module (RDM)
    • Technical Data - PTU And RDM
    • Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
    • Diagnostic Overview - AWD System
    • Check For An Active Or Intermittent Condition
    • Preliminary Diagnostic Checks
    • Diagnostic Test - PTU Actuator Motor
    • DTCM Verification Test
  • C2180-98-Motor 2 Power Stage Switch Temp - Component Or System Over Temperature
    • Description And Operation - All Wheel Drive (AWD) System
    • General System Architecture
    • Component Functional Description-Power Transfer Unit (PTU)
    • Component Functional Description-Rear Drive Module (RDM)
    • Technical Data - PTU And RDM
    • Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
    • Diagnostic Overview - AWD System
    • Check For An Active Or Intermittent Condition
    • Preliminary Diagnostic Checks
    • Diagnostic Test - PTU Actuator Motor
    • DTCM Verification Test
  • C2190-98-Motor 2 Power Stage Overload - Component Or System Over Temperature
    • Description And Operation - All Wheel Drive (AWD) System
    • General System Architecture
    • Component Functional Description-Power Transfer Unit (PTU)
    • Component Functional Description-Rear Drive Module (RDM)
    • Technical Data - PTU And RDM
    • Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
    • Diagnostic Overview - AWD System
    • Check For An Active Or Intermittent Condition
    • Preliminary Diagnostic Checks
    • Diagnostic Test - PTU Actuator Motor
    • DTCM Verification Test
  • C2200-04-Motor 2 Power Stage Test - System Internal Failures
    • Description And Operation - All Wheel Drive (AWD) System
    • General System Architecture
    • Component Functional Description-Power Transfer Unit (PTU)
    • Component Functional Description-Rear Drive Module (RDM)
    • Technical Data - PTU And RDM
    • Enabling/Set Conditions And Possible Causes - PTU/RDM Actuator Motor And OVERTEMP Faults
    • Diagnostic Overview - AWD System
    • Check For An Active Or Intermittent Condition
    • Preliminary Diagnostic Checks
    • Diagnostic Test - PTU Actuator Motor
    • DTCM Verification Test
  • C2201-64-Implausible Data Received From BCM
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2202-64-Terrain Switch Status Signal Not Available
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2203-24-Switch 1 Request Signal - Signal Stuck High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2204-24-Switch 2 Request Signal - Signal Stuck High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2205-24-External Temperature - Signal Plausibility Failure
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test