Timing Chain: Remove & Replace
WARNING: This page is about the Gladiator Big Bear, Full Time T/Case Control, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.6L Eng, All Chains | 11.6 | B | ||
| Combination Procedure: CAMSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| 3.6L Eng, Each | DOES NOT include Calibration. | 0.2 | B | |
| Combination Procedure: CRANKSHAFT GEAR OR SPROCKET: Remove & Replace: | ||||
| 3.6L Eng | 0.1 | B | ||
| Combination Procedure: CRANKSHAFT OIL SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: CRANKSHAFT POSITION SENSOR: Calibrate: | ||||
| 3.6L Eng, Cam/Crank Variation Relearn | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: TIMING CHAIN GUIDE: Remove & Replace: | ||||
| 3.6L Eng, Each | 0.1 | B | ||