Throttle Position (TP) Sensor
NOTE:
For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS
article in the ENGINE PERFORMANCE section.
TP SENSOR CONTINUITY (A/T)
| Condition (1) | Check Between Pin Nos. | Continuity? | ||
|---|---|---|---|---|
| .004" (.1 mm) | 1 & 2 | Yes | ||
| .024" (.6 mm) | 1 & 2 | No | ||
|
||||
TP SENSOR CONTINUITY (M/T)
| Test Condition | Continuity Between IDL & E? | Continuity Between POW & E? | ||
|---|---|---|---|---|
| .004" (.1 mm) (1) | Yes | No | ||
| .039" (1.0 mm) (1) | No | No | ||
| Wide Open Throttle | No | Yes | ||
|
||||