Fuel Pump Relay (Sephia)
- Remove relay from engine compartment fuse/relay box. Check for continuity between relay terminals No. 1 and 3. See Fig 1. If continuity does not exist, go to next step. If continuity exists, replace relay.
- Connect a jumper wire between positive battery terminal and relay terminal No. 2. Connect another jumper wire between negative battery terminal and relay terminal No. 4.
- Check continuity between relay terminals No. 1 and 3. Continuity should exist. If continuity does not exist, replace relay.
Courtesy of KIA MOTORS AMERICA, INC.