Intake Air Temperature (IAT) Sensor
NOTE:
Sephia IAT sensor component testing not available from manufacturer. For Sephia IAT sensor system testing, see TEST P0112: IAT CIRCUIT LOW INPUT or TEST P0113: IAT CIRCUIT HIGH INPUT in
SELF-DIAGNOSTICS - SEPHIA article.
On Sportage, IAT sensor is located on air cleaner assembly. Disconnect IAT sensor 2-pin connector. Measure resistance between IAT sensor terminals. Resistance should be 2210-2690 ohms at 68°F (20°C). If resistance is not as specified, replace IAT sensor.