Connecting Rod, Engine
SERVICE SPECIFICATIONSConnecting Rod Wrist Pin:
Inside Diameter 0.9055 - 0.9063 inch (23.0 - 23.021 mm)
Oil Clearance 0.0004 - 0.0010 inch (0.010 - 0.027 mm)
Connecting Rod Bearing Clearance:
Standard 0.0008 - 0.0019 inch (0.0020 - 0.05 mm)
Maximum 0.004 inch (0.10 mm)
Connecting Rod Side Clearance:
Do Not Measure Between Connecting Rod Cap And Crankshaft:
Standard 0.0044 - 0.0103 inch (0.110 - 0.262 mm)
Maximum 0.012 inch (0.30 mm)