Idle Air Control (IAC) Valve
Turn ignition off. Disconnect IAC 3-pin connector. Check resistance between terminals. See IDLE AIR CONTROL (IAC) VALVE RESISTANCES table. If resistances are not as specified, replace valve.
IDLE AIR CONTROL (IAC) VALVE RESISTANCES
| Measure Between Terminals No. (Wire Colors) | (1) Resistance - Ohms | |||
|---|---|---|---|---|
| Optima & Magentis (Canadian) | ||||
| 1 & 2 (ORG/BLK & PNK) | 15-16 | |||
| 2 & 3 (PNK & BLU) | 17-18 | |||
| Rio | ||||
| 1 & 2 (WHT & RED/YEL) | 16.5-18.5 | |||
| 2 & 3 (RED/YEL & WHT/RED) | 14.5-16.5 | |||
| Sephia | ||||
| 1 & 2 (WHT/YEL & RED/YEL) | 14-18 | |||
| 2 & 3 (RED/YEL & WHT/GRN) | 14-18 | |||
| Sportage | ||||
| 1 & 2 (BLU/RED & BLK/WHT) | 14-18 | |||
| 2 & 3 (BLK/WHT & RED/GRN) | 14-18 | |||
|
||||