LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2001 >> Rio Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> Fuel Injectors >> Fuel Injector Volume Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Volume Test

NOTE: For Optima & Magentis (Canadian) and Rio, injector volume specification is not given by manufacturer.
  1. Remove fuel injectors together with fuel rail. Secure fuel injectors to fuel rail. Place end of injector to be tested in graduated cylinder.
  2. If using injector tester, connect injector tester between battery and injector. If not using injector tester, reconnect injector connectors. Connect jumper wire between injector to ECM wire and ground. See appropriate wiring diagram in WIRING DIAGRAMS article for wire colors.
  3. Turn ignition on. Time injector flow and measure volume. Injector flow should be 4.4 oz. (130 ml) per minute. If volume is not as specified, replace injector. Use NEW "O" rings when installing injectors.
scientia non olet · About LEMON Manuals