Abs Control Unit: Installation
- Install hydraulic control unit into position and tighten the bolt and nut.
Tightening torque: 18~27 N.m (1.8~2.7 kg-m, 12~20 lb. ft.)
- Reconnect six brake lines. Be certain that the four lower outlet lines have been connected to the correct ports. Tighten the nuts to specification
Tightening torque: 12~22 N.m (1.3~2.2 kg-m, 9~16 lb. ft.)
- Connect the hydraulic control unit connector to the hydraulic control unit. Be certain connectors are fully mated.
- Bleed the brake system.