Rear Abs Sensor: Installation
- Install the ABS sensor and connect.
- Install the rear seat and rear side door trim.
- Install the ABS sensor wire attaching trim.
- Put the ABS sensor into the back plate and install the ABS sensor.
Tightening torque: 8~12 N.m (0.8~1.2 kg-m, 6~8 lb. ft.)
- Install the rear shock absorber attaching bolt.
Tightening torque: 78~98 N.m (8.0~10.0 kg-m, 58~72 lb. ft.)
- Connect the negative battery cable from the battery.