Master Power Window Switch Operates Driver's Window Only
- Turn ignition on. Using a voltmeter connected to ground, backprobe and ensure battery voltage exists at specified wire color terminals of master power window switch while operating switch. See WINDOW SWITCH POWER DISTRIBUTION table. See WIRING DIAGRAMS . If battery voltage exists, go to next step. If battery voltage does not exist, replace master power window switch. Retest system.
- Using a voltmeter connected to ground, backprobe and ensure battery voltage exists at each passenger window switch while operating master switch. See WINDOW SWITCH POWER DISTRIBUTION table. See WIRING DIAGRAMS . If battery voltage does not exist, repair appropriate power feed circuit to passenger window switch. Retest system.
WINDOW SWITCH POWER DISTRIBUTION
| Window | Condition | Wire Color |
|---|---|---|
| Right Front | DOWN | Red/Blue |
| ..... | UP | Red/Green |
| Left Rear | DOWN | Red/Yellow |
| ..... | UP | Red/White |
| Right Rear | UP | Red/Black |
| ..... | DOWN | Red/Brown |