LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2003 >> Rio Base, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications >> Wheel Alignment Procedures >> Toe-In Adjustment >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Toe-In Adjustment: Inspection

  1. Position the vehicle on level ground and place the front wheels in a straight-ahead position within +/-5 degrees. Measure the toe-in dimensions "A" and "B" of front wheels with a standard toe-in gauge. Compare measurements with manufacturer's specifications. See WHEEL ALIGNMENT SPECIFICATIONS  table.
  2. If measurements are within specification, no adjustment is necessary. If measurements are not within specification, see ADJUSTMENT PROCEDURE  .
Fig 1: Measuring Toe-In
G00285400Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals