Retrieving Diagnostic Trouble Codes
NOTE:
To enter self-diagnostics, turn ignition off, connect Hi-Scan Pro/Kia Data Pro Scan Tool (09900-11000 Scan Body & 09900-21100 16-pin DLC Cable) or equivalent, to OBD-II Data Link Connector (OBD-II DLC). For specific scan tool operating procedures, see the scan tool manufacturer's instruction manual.
- Before entering on-board diagnostics. See SERVICE PRECAUTIONS . Turn ignition off. Locate and Identify Data Link Connector (OBD-II DLC) under left side of instrument panel. See Fig 1 and Fig 2 . Connect scan tool to OBD-II DLC connector.
- Start engine and retrieve Diagnostic Trouble Codes (DTCs). Read and record scan tool self-diagnostic output (stored codes). See DIAGNOSTIC TROUBLE CODE INDEX table. To perform testing for retrieved codes, see appropriate DTC test under DIAGNOSTIC TESTS .