Starter Specifications
STARTER SPECIFICATIONS
| Application | Specifications | ||||
|---|---|---|---|---|---|
| Armature | |||||
| Commutator Runout | |||||
| Standard | 002" (.05 mm) | ||||
| Limit | .0039" (.1 mm) | ||||
| Commutator Diameter | |||||
| Standard | 1.157" (29.4 mm) | ||||
| Limit | 1.118" (28.4mm) | ||||
| Commutator Undercut (Mica) Depth | |||||
| Standard | 0.02" (0.5 mm) | ||||
| Limit | 0.08" (.2 mm) | ||||
| Pinion Gap | 0.79" (.2 mm) | ||||
| Segment Mold Depth | |||||
| Standard | 0.02" (0.5 mm) | ||||
| Limit | 0.08" (.2 mm) | ||||
| INCH Lbs. (N.m) | |||||
| Brush Length | |||||
| Standard | 106-150 (12-17) | ||||
| Limit | 62-106 (7-12) | ||||
|
|||||