On Board Diagnostics-II

The purpose of Engine Control Module (ECM) OBD-II software is to ensure proper emission system operation for the life of vehicle. OBD-II monitors emissions related components and systems for deterioration and failure. For emission system related failures, ECM will store a Diagnostic Trouble Code (DTC) and command Malfunction Indicator Light (MIL) to illuminate. See MALFUNCTION INDICATOR LIGHT  . DTCs can be accessed with Hi-Scan Pro/Kia Data Pro Scan Tool (0K2CA 089 HSP/K96 DP KIT), or equivalent, connected to OBD-II Data Link Connector (OBD-II DLC).

OBD-II software includes advanced DIAGNOSTIC TESTS modes and allows detection of faults that do NOT illuminate the MIL. Test mode 7 allows verification of repair after one drive cycle. Test mode 7 does not require duplicating particular vehicle operating conditions that existed during original failure. Test mode 22 accesses PIDs (displays component input and output values). Advanced DIAGNOSTIC TESTS modes can be accessed with Hi-Scan Pro/Kia Data Pro Scan Tool.