Anti-Lock Brakes DTCS
NOTE:
For anti-lock brakes DTC diagnosis, refer to INSPECTION PROCEDURE FOR DIAGNOSTIC TROUBLE CODES
. For anti-lock brakes DTC description, see ANTI-LOCK BRAKES DIAGNOSTIC TROUBLE CODE (DTC) LIST .
ANTI-LOCK BRAKES DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| C1604 | ECU Internal Failure |
| Temp. Sensor Signal Is Out Of Range | |
| C1700 | Wrong Combination Of Vehicle & Sys. |
| C1200 C1203 C1206 C1209 |
Sensor Signal Current Is Out Of Range (FL, FR, RL, RR) |
| C1201 C1204 C1207 C1210 |
Wheel Speed Sensor Signal Changes Erratically (FL, FR, RL, RR) |
| Periodic Drops Of A Wheel Speed Signal | |
| C1202 C1205 C1208 C1211 |
Missing Wheel Speed Sensor Signal Or Wheel Speed Sensor Signal Continuously Indicates A Too Low Wheel Speed |
| Too Long Pressure Reduction & Following Pressure Hold Phase | |
| C1101 | High Voltage |
| C1102 | Low Voltage |
| C1503 | Signal From TCS/ESP Off SW Is Fixed To On |
| C1513 | Implausible Signal Of Brake Light Switch |
| C2122 | Supply Voltage U Is Out Of Range |
| C2402 | Pump Motor Supply Voltage Too Low When The Pump Motor Is Deactivated |
| C1611 | Missing CAN Message (Engine ECU->TCS) |
| C1612 | Missing CAN Message (TCU->TCS) |
| C1616 | Too Many CAN Bus Off Events |
| C2227 | Brake Disc Temperature Too High |