LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2005 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System/Fuel System >> Fuel Delivery System >> Fuel Injector >> Inspection >> Volume Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Volume Test

  1. Remove injectors together with fuel rail.
  2. Secure injectors to distributor pipe with wire.
  3. Reconnect injector connectors.
  4. Connect jumper wire to injector to ECM wires (BRN) and ground.
  5. Turn ignition ON.
  6. Inspect injector volume with graduated container.

    Injector volume : 1.9 g/sec

    If not as specified, replace injectors.

    NOTE: When reassembling fuel rail and injectors:
    • Use new injector O-rings
    • Apply a small amount of clean engine oil to each O-ring before installing