System Inspection

Cooling System Inspection

1. Check cooling system coolant level and fill if low.
2. Check for a proper cooling system operation. Especially check that cooling and condenser fan working normally.
3. Remove the thermostat and check the following items:
   1. Stuck or damaged.
   2. Verify the temperature at which the valve begins to open.
      1. Initial opening temperature: 86.5~89.5°C (188~193°F)
      2. Full opening temperature: 100°C (212°F)
4. Is a problem found?

   YES

   1. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

   NO

   1. Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.