Shift Lever: Installation

Install the retainer (A) and the nuts (B).
TORQUE: 8-12 N.m (0.8-1.2 kgf.m, 5.8-8.6 lb-ft)

Fig 1: Identifying Retainer And Nuts
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: In case, install the crush pad and cowl cross bar.
Install the shift lever assembly (A).
TORQUE: 9-14 N.m (0.9-1.4 kgf.m, 6.5-10.1 lb-ft)

Fig 2: Identifying Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Install the sport mode connector (A).

Fig 3: Identifying Sport Mode Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift cable (A) and the wire (B) to the shift (ever assembly.

Fig 4: Identifying Shift Cable
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Install the shift cable to the transaxle assembly before Installing the shift cable to the shift lever assembly.
Install the air duct (A).

Fig 5: Identifying Air Duct
Courtesy of KIA MOTORS AMERICA, INC.
Install the center console, refer to CONSOLE .
Install the shift cable to the transaxle assembly.
TORQUE: 8-12 N.m (0.8-1.2 kgf.m, 5.8-8.6 lb-ft)