Precautions For Electrical Inspections

• When using electrical test equipment, insert the probe of the tester into the wire side of the connector. Do not insert the probe of the tester into the terminal side of the connector, and do not tamper with the connector.
  Fig 1: Identifying Precaution For - Do Not Insert Probe Of Tester Into Terminal Side Of Connector

  Courtesy of KIA MOTORS AMERICA, INC.
• Use a u-shaped probe. Do not insert the probe forcibly.
• Use specified service connectors for troubleshooting.

Using improper tools could cause an error in inspection due to poor metal contact.